Wi-Fi (Android Enterprise)

Configure WiFi settings on your devices when:

General: Network


Network Name	Define the network name to which the device should connect. This name also serves as the identifier for the wireless policy.
Set as Active Network	Enable this option so the device automatically connects to the specified Wi-Fi network. Note: Assigning a new Wi-Fi profile with this option enabled only replaces any existing Wi-Fi profile if the Wi-Fi signal strength is Good or higher.

Security Type

Select the protocol you wish to use on the network. Choose from:

802.1x Enterprise

Note: If you select 802.1x Enterprise, the protocol and authentication configuration options appear. Select from the following protocols:

Configure the following authentication options:


Username	Enter the username or use a macro to define it.
Password	Enter the corresponding password for the username.
User Identity Certificate	Select a certificate to authenticate the wireless network connection. Note: Only pre-uploaded certificates appear in this list.
CA Certificate	Select a certificate authority (CA) certificate to verify the network connection. Note: Only pre-uploaded certificates are available.
Phase 2 Authentication	Choose the secondary authentication protocol. Note: GTC and MS-CHAP-V1 are not supported for AMAPI-enrolled devices.
Anonymous Identity	Enter an externally visible identifier (applicable for TTLS, PEAP, and EAP-FAST protocols).

Password

Enter a password to connect to the network.


Proxy	Choose from the following: Automatic: Enter a PAC URL to retrieve proxy settings. Manual: Enter proxy settings manually. None: Skip proxy settings for the Wi-Fi connection.
URL	Enter the Proxy Auto-Configuration (PAC) file URL containing proxy settings. Note: This option is only available when opting for Automatic proxy.
Proxy Server	Specify the proxy server address and (optionally) the port number. Note: This option is only available when opting for Manual proxy.
Exceptions	List any host exceptions that should connect directly without using the proxy. Separate entries with commas. Note: This option is only available when opting for Manual proxy.