Auto-enroll Devices into SOTI Snap

Before you begin

Complete steps one through four from Enroll Devices with Enrollment ID first.

This procedure requires the involvement of your SOTI MobiControl administrator.

About this task

Follow the steps below to auto-enroll SOTI MobiControl enrolled devices into SOTI Snap in one of two ways:

Using a Configuration Token for iOS

Before you begin

The iOS device used below must be enrolled in SOTI MobiControl.

About this task

To automatically enroll iOS devices using a configuration token, follow the steps below:

Procedure

  1. Select Enroll using MobiControl. The Enroll using MobiControl window opens.
    Enroll using MobiControl window
  2. Select iOS as the agent operating system for the device(s) you are enrolling. Copy the Configuration token.
  3. Select Close. Select OK.
    Note: The remaining actions occur in SOTI MobiControl with the assistance of the SOTI MobiControl administrator.
  4. From the SOTI MobiControl main menu, select Policies > Apps.
  5. Select New App Policy. The Create App Policy window opens. Select the platform for the device(s) you are enrolling.
    Create App Policy window
  6. From General, select App Policy Name and provide a name for your policy.
  7. Select Apps, then select Add.
  8. From App Source, select Enterprise.
  9. Select Browse File to locate and upload your app.
  10. Select Configure. The Advanced Configurations window opens.
    Advanced Configuration window
  11. From Managed App Config, select Application Configuration. Paste the configuration token, and select Save.
  12. Select Save and Assign. The Assign dialog box opens. Define the policy assignment rules and assign the policy to target devices. See Assign (App Policy) for SOTI MobiControl.
  13. From your iOS device, open the SOTI MobiControl Agent. From the Application Catalog, locate the SOTI Snap application and tap Free. The SOTI Snap application loads and the device is auto-enrolled.

Using the Most Recent SOTI Snap .apk Build

About this task

You need a copy of the most recent .apk build of the SOTI Snap Device Agent. SOTI MobiControl should have the Android device used enrolled and have the SOTI Snap Device Agent installed.