e-WFC Wireless

This configuration setting adds a wireless profile for e-WFC Wireless. For procedure, see Creating a SOTI MobiControl Stage Barcode.

Action Select one of the following actions:
  • Configure Wireless Settings: Configure WiFi settings for e-WFC Wireless.
  • Turn on radio: Turn on the WiFi radio.
  • Turn off radio: Turn off the WiFi radio.
Name Enter a name for your e-WFC Wireless settings.
Network Name (SSID) Enter the Service Set Identifier (SSID) to which the radio will connect. Select the User Defined option to allow the user to enter or change this information.
Authentication Select the authentication method.
Encryption Select the encryption method.
WEP Key Enter the WEP key, if the encryption method is set to WEP 64 or WEP 128. Select the User Defined option to allow the user to enter or change this information.
Key Index Select the key index from the list, if applicable.(This list is available only if the encryption method is set to WEP 64 or WEP 128.)
The key is automatically provided Select this option if the network key for clients is automatically provided.(This option is available if the encryption method is set to WEP 64 or WEP 128.)
Use 802.1x authentication Select this option to use IEEE 802.1x for authentication.(This option is available only for WEP authentication.)
EAP Select the Extensible Authentication Protocol (EAP) type associated with the profile, if the authentication method is WPA - Enterprise or WPA2 - Enterprise.
PSK Enter the pre-shared key (PSK) associated with the profile, if the authentication method is WPA - Personal or WPA2 - Personal.
Identity Enter the EAP-mode identity. Select the User Defined option to allow the user to enter or change this information.
Password Enter the EAP-mode password. Select the User Defined option to allow the user to enter or change this information.
Show Network Key Select this option to display the network key in plaintext.
Anonymous ID Enter the EAP-mode anonymous ID. Select the User Defined option to allow the user to enter or change this information.
Certificate Enter the name of the Personal Certificate. The Personal Certificate is used with EAP-TLS.
Validate Server Certificate Select this option to enable server certificate validation.
Connects To Select the destination network the device will connect to: Internet or Work.
This is a hidden network Select this option if the network is hidden.
Turn on radio after configuration Select this option to turn on the device's WiFi radio after configuration.