| Action |
Select one of the following actions:
- Configure Funk Security: Configure Funk Security for Intermec Wireless.
- Turn on radio: Turn on the WiFi radio.
- Turn off radio: Turn off the WiFi radio.
- Configure Other Radio Settings: Configure other radio settings for Intermec Wireless.
|
| Name |
Enter a name for your Intermec Wireless settings. |
| Profile |
Select which profile you want to configure. |
| Profile Label |
Enter a name for the selected profile. Select the User Defined option to allow the user to enter or change this information. |
| Network Type |
Select the type of network this profile will connect to: Ad-Hoc or Infrastructure. |
| Channel |
Select the channel number that the radio should work with based on your country's regulatory requirements. This list is available only if Network Type is set to Ad-Hoc. |
| SSID |
Enter your Service Set Identifier (SSID) to which the radio will connect. Select the User Defined option to allow the user to enter or change this information. |
| Power Mode |
Select the power consumption mode:
- Disabled (CAM): Constantly awake mode
- Enabled (Fast-PSP): Fast power saving mode
|
| 802.1x |
Select the authentication method associated with the profile. |
| Association |
Select the type of association to be used. |
| Encryption |
Select the method of encryption to be used. |
| Pre-Shared Key |
Enter the pre-shared key associated with the profile, if the Association type is set to WPA or WPA2. |
| Show Network Key |
Select this option to display the network key in plaintext. |
| Enable mixed cell |
Select this option to enable mixed cell. |
| Allow fast roaming (CCKM) |
Select this option to enable fast roaming (CCKM). |
| Enable Logging |
Select this option to enable logging. |
| Connects To |
Select the destination network the device will connect to: Internet or Work. |
| Turn on radio after configuration |
Select this option to turn on the device's WiFi radio after configuration. |
