Denso BHT WLAN

This configuration setting adds a wireless profile for Denso BHT WLAN. For procedure, see Creating a SOTI MobiControl Stage Barcode.

Action Select one of the following actions:
  • Configure Wireless Settings: Configure WiFi settings for Denso BHT WLAN.
  • Turn on radio: Turn on the WiFi radio.
  • Turn off radio: Turn off the WiFi radio.
Name Enter a name for your Denso BHT WLAN settings.
SSID Enter your Service Set Identifier (SSID) to which the radio will connect. Select the User Defined option to allow the user to enter or change this information.
Advanced Click the Advanced button to open the Advanced dialog box, in which you can enter advanced Denso BHT WLAN settings.
Authentication Select the authentication method for your network.
Encryption Select the encryption method for your network.
EAP Type Select your Extensible Authentication Protocol (EAP) method.
User ID Enter the EAP-mode user ID. Select the User Defined option to allow the user to enter or change this information.
Password Enter the user EAP-mode password. Select the User Defined option to allow the user to enter or change this information.
PSK Enter the pre-shared key (PSK) associated with the profile, if the authentication method is WPA-PSK or WPA2-PSK. Select the User Defined option to allow the user to enter or change this information.
Show Network Key Select this option to display the network key in plaintext.
Validate Server Select this option to enable EAP-mode server certificate verification.
Connects To Select the destination network the device will connect to: Internet or Work.
Turn on radio after configuration Select this option to turn on the device's WiFi radio after configuration.

Advanced

This dialog box enables you to enter advanced Denso BHT WLAN settings.

Power Save Select the power consumption mode:
  • CAM: Constantly awake mode
  • FastPSP: Fast power saving mode
  • MaxPSP: Maximum power saving mode
Radio Mode Select the WLAN standards to be used: 802.11b, 802.11g, or 802.11n.
Preamble Select the preamble mode.
2.4GHz Roaming Level (dBm) Enter a dBm value.
5GHz Roaming Level (dBm) Enter a dBm value.
Roaming Beacon Lost Enter a roaming beacon lost number from 1 to 10.
WMM Support Select whether to enable of disable WMM support.
Available 5GHz Band Select what 5Ghz band to use.