Wireless ZeroConfig
This configuration setting adds a wireless profile for Microsoft Wireless ZeroConfig. For procedure, see Creating a SOTI MobiControl Stage Barcode.
| Action | Select one of the following actions:
|
| Name | Enter a name for your Wireless ZeroConfig settings. |
| Network Name (SSID) | Enter your Network name/Service Set Identifier (SSID). Select the User Defined option to allow the user to enter or change this information. |
| This is a device-to-device (ad-hoc) connection | Select this option if you are configuring an ad-hoc connection. |
| Data Encryption | Select the data encryption method for your network. |
| Authentication | Select the authentication method for your network. |
| The key is automatically provided | Select this option if the network key for clients is automatically provided.(This option is available only for WEP encryption.) |
| Network Key | Enter the network Key for your network. Select the User Defined option to allow the user to enter or change this information. |
| Show Network Key | Select this option to display the network key in plaintext. |
| Key Index | Select the key index from the list, if applicable.(This list is available only for WEP encryption.) |
| Use IEEE 802.1x network access control | Select this option to use IEEE 802.1x for port-based network access control. You must select this option before you can select an EAP type.(This option is available only for WEP encryption.) |
| EAP Type | Select your Extensible Authentication Protocol (EAP) method. |
| Turn on radio after configuration | Select this option to turn on the device's WiFi radio after configuration. |