e-WFC Wireless
This configuration setting adds a wireless profile for e-WFC Wireless.
Action | Select one of the following actions:
|
Name | Enter a name for your e-WFC Wireless settings. |
Network Name (SSID) | Enter the Service Set Identifier (SSID) to which the radio will connect. Select the User Defined option to allow the user to enter or change this information. |
Authentication | Select the authentication method. |
Encryption | Select the encryption method. |
WEP Key | Enter the WEP key, if the encryption method is set to WEP 64 or WEP 128. Select the User Defined option to allow the user to enter or change this information. |
Key Index | Select the key index from the list, if applicable.(This list is available only if the encryption method is set to WEP 64 or WEP 128.) |
The key is automatically provided | Select this option if the network key for clients is automatically provided.(This option is available if the encryption method is set to WEP 64 or WEP 128.) |
Use 802.1x authentication | Select this option to use IEEE 802.1x for authentication.(This option is available only for WEP authentication.) |
EAP | Select the Extensible Authentication Protocol (EAP) type associated with the profile, if the authentication method is WPA - Enterprise or WPA2 - Enterprise. |
PSK | Enter the pre-shared key (PSK) associated with the profile, if the authentication method is WPA - Personal or WPA2 - Personal. |
Identity | Enter the EAP-mode identity. Select the User Defined option to allow the user to enter or change this information. |
Password | Enter the EAP-mode password. Select the User Defined option to allow the user to enter or change this information. |
Show Network Key | Select this option to display the network key in plaintext. |
Anonymous ID | Enter the EAP-mode anonymous ID. Select the User Defined option to allow the user to enter or change this information. |
Certificate | Enter the name of the Personal Certificate. The Personal Certificate is used with EAP-TLS. |
Validate Server Certificate | Select this option to enable server certificate validation. |
Connects To | Select the destination network the device will connect to: Internet or Work. |
This is a hidden network | Select this option if the network is hidden. |
Turn on radio after configuration | Select this option to turn on the device's WiFi radio after configuration. |