Devicescape Wireless
This configuration setting adds a wireless profile for Devicescape Wireless.
Action | Select one of the following actions:
|
Name | Enter a name for your Devicescape Wireless settings. |
SSID | Enter your Service Set Identifier (SSID) to which the radio will connect. Select the User Defined option to allow the user to enter or change this information. |
Auth. Mode | Select the authentication method for your network. |
Encryption | Select the encryption method according to the authentication method setting. |
WEP Auth. | Select the WEP authentication mode: Open or Shared. |
Key Length | Select the length of the WEP key: 64 bit or 128 bit. |
Key Type | Select the WEP key type: ASCII or Hexadecimal Keys. |
EAP | Select the Extensible Authentication Protocol (EAP) type associated with the profile, if the authentication method is 802.1X, WPA - Enterprise, WPA2 - Enterprise, or CCKM-WPA2. |
PSK | Enter the pre-shared key (PSK) associated with the profile, if the authentication method is WPA - Personal or WPA2 - Personal. Select the User Defined option to allow the user to enter or change this information. |
User | Enter the EAP-mode user name. Select the User Defined option to allow the user to enter or change this information. |
Password | Enter the user EAP-mode password. Select the User Defined option to allow the user to enter or change this information. |
Anony Id | Enter the EAP-mode anonymous ID. Select the User Defined option to allow the user to enter or change this information. |
Client Cert. | Enter the name of the digital certificate located on the device. The digital certificate is used with EAP-TLS. Select the User Defined option to allow the user to enter or change this information. |
Tunnel PAC | Enter the full pathname of the Protected Access Credential (PAC) file on the device. Tunnel PAC is used with EAP-FAST to authenticate the user. This field is available when the authentication method is 802.1X, WPA - Enterprise, WPA2 - Enterprise, or CCKM-WPA2, and the EAP type is FAST-MSCHAPv2. Select the User Defined option to allow the user to enter or change this information. |
Mach. PAC | Enter the full pathname of the Protected Access Credential (PAC) file on the device. Machine PAC is used with EAP-FAST to authenticate the device. This field is available when the authentication method is 802.1X, WPA - Enterprise, WPA2 - Enterprise, or CCKM-WPA2, and the EAP type is FAST-MSCHAPv2. Select the User Defined option to allow the user to enter or change this information. |
Provisioning | Select the PAC provisioning mode, if the EAP type is set to FAST-MSCHAPv2. |
Verify Server Certificate | Select this option to enable server certificate verification. |
Enable OPMK | Select this option to enable Opportunistic Pairwise Master Key caching, if the authentication method is WPA2 - Enterprise. |
Connects To | Select the destination network the device will connect to: Internet or Work. |
Turn on radio after configuration | Select this option to turn on the device's WiFi radio after configuration. |