| Label Type |
Select the type of label that your printer is using:
- Continuous: Prints labels based on configured label length.
- Gap/Notch: Prints labels based on detecting gaps/notches between labels.
- Mark: Prints labels based on a black mark at the back of the label which printers recognize as the end point and start point of labels.
|
| Label Removal Method |
Select how the label is removed while printing is occurring. Methods include:
- Tear Off: Printer prints as fast as it is set to with no pause.
- Peel Off: Label backing is peeled off by the printer hardware.
- Rewind: Printer hardware component peels the back off of the label. A mechanical arm rolls up peeled backing.
- Applicator: For printers equipped with an applicator board to synchronize printing with control device signaling.
- Cutter: Mechanical cutter is triggered to cut from the rest. The printer waits until the cut is completed before printing the next label.
- Delayed Cutter: Printer only cuts when it receives a command from the printing software.
- RFID: Printer detects the RFID element of the label and prints accordingly.
- Linerless Peel: Printer waits until the previous label is torn off before printing the next label.
- Linerless Rewind: Linerless paper is wound onto the option rewind bar.
- Kiosk: Printer follows behavior determined by kiosk use.
- Linerless Tear: Prints linerless labels for the user to tear off. Printer does not wait between labels if more than one is printed.
- Stream: Prints second label before first label's printing is completed but does not complete second label's print until the next Start Print signal is received.
|
| Distance Between Label Gap and Mark |
Set the distance between the label gap and the black mark. |
| Label Position |
Set the position of the left starting edge of the label. |
| Printer Label Length |
Set the length of the printer label. |
| Printer Label Width |
Set the width of the printer label. |
